Downloads

Firmware Update Tool

Firmware Update Tool

Follow the Steps below to Download

Step 1Check detail information.

TitleDescriptionLanguageRelease Date
(Firmware Version)		Size
Firmware Update Tool
This tool updates your Brother machine firmware via the internet, by sending the firmware to your machine from the Brother internet server.
English (US/ Canada)21/02/2019
(M)		18.83
MB
Update History
21/02/2019 Main: M
  • Fix software bugs.

    • 22/04/2010 Main: L
  • Improves the machines printing control when using paper that creates a lot of paper dust.

    • 24/12/2009 Main: K
  • Corrects an address book retrieval issue.
  • Corrects the issue that the machine could not register Group Dial under certain conditions.

    • 15/06/2009  
  • Correction to solve the issue that occurs when running the PC-FAX Receiving software with certain timing problems.
  • Corrects the display issue that occurs when pressing the One Touch key.
  • Corrects the fax send/receive issue that occurs under certain conditions. (UK model only)
  • Changes the print speed when the printer detects the use of the small size paper.

    • 21/08/2008  
  • Correction of Firmware to reset LAN settings without affecting Fax to Server settings.
  • Correction to make the machine restart after being reset to factory default using BRAdmin Professional software.
  • Correction for the machine to print Help List properly.
  • Correction to enable the changed TCP/IP setting with remote setup to be stored properly.
  • Correction of the scan or copy buttons in ControlCenter3 to enable the machine to be used properly.(Without disconnention)
  • Correction to enable the machine to print properly when printing via Linksys WAP4400 Wireless AP.
    		•  Supported OS

    Windows 10 (32-bit), Windows 10 (64-bit), Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit)
    How to identify the firmware version

    Click here to see how to identify the firmware version.

    Step 2Read before downloading.

    Notes before downloading
     
    • Please make sure that the machine you are going to update the firmware is not busy. Also, make sure that there is no data left in the machine memory when running the firmware update tool.
     
    • Please check the following on your computer.
      • Open Printer Properties and confirm that your printer is functioning correctly by printing a test page.
      • Please close all applications and TSR's.
      • If you are using a Windows XP SP2 Firewall or other Firewall software, disable it.
     
    • It is not possible to update the firmware unless the following conditions are met on your machine.
      • FAX receive data does not exists in the memory of the machine. For instructions on how to check your memory is clear, please refer to the 'User's Guide'.
      • FAX send data does not exists in the memory of the machine (timer sending job or retry job).
      • The machine is not calling or dialing FAX.
      • The machine is not scanning a document.
      • The machine is not copying / or in copy settings (copy mode, number of copies, etc..).
      • The machine is not in the Settings Menu.
      • The telephone line is not busy. Disconnect your telephone line (to prevent any incoming calls).
      • There's no error message on LCD panel.
      • If you are using a Macintosh computer, Printer Driver or CUPS Printer Driver must be installed.
     

    The following data will be deleted when you update the firmware.

    • Journal report data
    • Caller ID log 

    Step 3Read the End-User Licence Agreement (EULA).

    Agree to the EULA and Download