FAQs & Troubleshooting
Popular |
HL-L5200DW(T)
216 Results
1.
Replace Drum
2.
(Video) Replace the Toner Cartridge
3.
Paper is Jammed inside the Machine
4.
Setup a Brother machine on a wireless (Wi-Fi) network.
5.
Reset the Network Settings to the Factory Settings
6.
Paper is Jammed in the Paper Tray
7.
Print the Network Configuration Report
8.
My Brother machine could not be found over the network when I installed drivers on my computer.
9.
(Video) Load A4/Letter paper
10.
Cannot print after a Windows 10 update (June 2020)
11.
(Video) Update the Driver or Firmware for your Brother machine
12.
What is the default password for my Brother network card, BRAdmin, Remote Setup or Web Based Management?
13.
Enable the Brother machine's network interface.
14.
Paper is Jammed in the 2-sided Tray
15.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
16.
(Video) Set up your Brother machine
17.
How to identify your Operating System (OS).
18.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
19.
Install the optional lower tray
20.
Drum !
21.
Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
22.
Add your Brother machine with AirPrint (macOS)
23.
Update your machine's firmware using Brother iPrint&Scan (Android/iOS)
24.
Size mismatch
25.
Paper is Jammed in the Back of the Machine
26.
I cannot print on a wireless (Wi-Fi) network (Windows)
27.
Print both sides of paper or a booklet automatically
28.
I cannot print using my Brother machine on a wired network. (Windows/macOS)
29.
Toner Low or Prepare New Toner Cartridge
30.
Jam MP Tray