MFC-J450DW
FAQs & Troubleshooting |
MFC-J450DW
Date: 11/06/2013 ID: faq00003190_000
Change my Brother machine's default fax and copy settings.
You can program new default fax- and copy-option settings into your Brother machine. The defaults you program will remain in place until you change them.
You can save the fax-option settings you use most often—such as Fax Resolution, Contrast, Real Time TX, and Glass ScanSize—by setting them as your machine's new defaults.
To program new default fax-option settings, follow these steps:
Programming new default copy settings
You can save the copy-option settings you use most often—such as Quality, Enlarge/Reduce, Density, Page Layout, Remove Background, and 2-sided Copy—by setting them as your machine's new defaults.
To program new default copy-option settings, follow these steps:
- To program new default fax-option settings, click here.
- To program new default copy-option settings, click here.
You can save the fax-option settings you use most often—such as Fax Resolution, Contrast, Real Time TX, and Glass ScanSize—by setting them as your machine's new defaults.
To program new default fax-option settings, follow these steps:
- Press (Fax)
- Press the Up or Down arrow key to choose the setting you want to change.
- You can choose Fax Resolution, Contrast, Real Time TX, or Glass ScanSize.
- Press OK.
- Press the Up or Down arrow key to choose the option you want to set.
- Press OK.
- Do one of the following:
- To change additional settings, repeat Steps 2 through 5.
- After you have finished changing settings, go to Step 7.
- Press the Up or Down arrow key to choose Set New Default.
- Press OK.
- Press 1.
- Press Stop/Exit.
Programming new default copy settings
You can save the copy-option settings you use most often—such as Quality, Enlarge/Reduce, Density, Page Layout, Remove Background, and 2-sided Copy—by setting them as your machine's new defaults.
To program new default copy-option settings, follow these steps:
- Press (Copy).
- Press the Up or Down arrow key to choose the setting you want to change.
- You can choose Quality, Enlarge/Reduce, Density, Page Layout, Remove Background, or 2-sided Copy.
- Press OK.
- Press the Up or Down arrow key to choose the option you want to set.
- Press OK.
- Do one of the following:
- To change additional settings, repeat Steps 2 through 5.
- After you have finished changing settings, go to Step 7.
- Press the Up or Down arrow key to choose Set New Default.
- Press OK.
- Press 1.
- Press Stop/Exit.
MFC-J450DW, MFC-J470DW, MFC-J475DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.