FAQs & Troubleshooting
Popular |
99 Results
- 1How to set up the cap frame driver. [Video instructions]
- 2How to Embroider on Cap. [Video instructions]
- 3Maintenance (Cleaning the bobbin case) [ Video ]
- 4How to use the Round frame (PRPRFK1) [Video instructions]
- 5How to use the the versatile magnetic frame [Video instructions]
- 6How to Embroider on Pet Collar. [Video instructions]
- 7How to Embroider on Shoes. [Video instructions]
- 8"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 9Tutorial videos on how to use the machine [Video instructions]
- 10Maintenance (Cleaning the thread paths of the upper threads) [ Video ]
- 11How to use the Compact frame (PRHCK1 / PRSFK1 / PRHCK1AP) [Video instructions]
- 12How to set up the cap frame. [Video instructions]
- 13"Preventive maintenance is recommended" message appears on the LCD. What does it mean?
- 14"Check upper and bobbin thread." message appears on the LCD. What does it mean?
- 15Maintenance (Cleaning around the needle plate)
- 16How to use the magnetic sash frame (PRMS360 / PRMS360AP) [Video instructions]
- 17How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 18How to Embroider on Bag. [Video instructions]
- 19How to Embroider on Clothes. [Video instructions]
- 20Embroidery Data Precautions (About the types of embroidery data that can be used.)
- 21How do I attach or remove the embroidery frame ?
- 22How do I change the needle?
- 23How do I adjust the tension of the upper thread ?
- 24How do I adjust the tension of the bobbin thread ?
- 25Maintenance (Cleaning the thread paths of the upper threads)
- 26How do I install a bobbin into the machine?
- 27"OK to cancel the current pattern selection?" message appears on the LCD. What does it mean?
- 28Nothing happens, even if the LCD display is pressed.
- 29"This pattern cannot combine." message appears on the LCD. What does it mean?
- 30"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 31How do I embroider on small pieces of fabric ?
- 32"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 33"Needle bar case home position error." message appears on the LCD. What does it mean?
- 34"Stop while needle bar case transferring." message appears on the LCD. What does it mean?
- 35"Needle case motor has been locked." message appears on the LCD. What does it mean?
- 36"Please make sure the PC is connected to the machine via the USB cable to run the Link application." message appears on the LCD. What does it mean?
- 37"Please set up the "Thread antenna"" message appears on the LCD. What does it mean?
- 38Although the thread is not broken, a broken thread error occurs and the machine stops.
- 39The bobbin thread breaks.
- 40"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 41"Trimming sensor error." message appears on the LCD. What does it mean?
- 42"This USB media cannot be used." message appears on the LCD. What does it mean?
- 43"This pattern cannot be used." message appears on the LCD. What does it mean?
- 44"This pattern cannot be used since it exceeds the data capacity." message appears on the LCD. What does it mean?
- 45"There is a pattern included that cannot be saved to USB media/computer. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 46"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 47"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 48Maintenance (Cleaning the bobbin case)
- 49"Needle threader error" message appears on the LCD. What does it mean?
- 50When thread got tangled