FAQs & Troubleshooting
Popular |
256 Results
- 1Mat and Material Combinations
- 2List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 3How do I Change or Delete a Registered CanvasWorkspace Login ID?
- 4The material to be cut/drawn peels off during cutting/drawing.
- 5About Blade Extension, Cutting Pressure and Mat
- 6List of Error Messages for CanvasWorkspace (Others)
- 7List of Error Messages
- 8N12001 appears on the computer screen.
- 9Replacing the Blade
- 10List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 11How do I transfer the pattern (to cut, draw, line emboss, etc.) using a Wireless LAN connection? (Mobile Device Instructions)
- 12About CaptureMat FUNCTION (Wireless Network Connection Only)
- 13How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]
- 14How to Activate a Pattern Collection on CanvasWorkspace for PC [Video]
- 15The mat or the material catches on a feed roller during cutting/drawing.
- 16How to set up the wireless connection using WLAN Assistant Wizard. (Computer Instructions)
- 17How to Use the Printable Sticker Function on CanvasWorkspace for PC [Video]
- 18Cutting/Drawing by Tracing an Image
- 19How to set up the wireless connection using wireless network name (SSID) & network password (key). (Recommended Setup, Mobile Device Instructions)
- 20How to set up the wireless connection using router’s WPS button. (Computer Instructions)
- 21How to Use the Rhinestone Function on CanvasWorkspace for PC [Video]
- 22E01002 appears on the computer screen.
- 23E00011 appears on the computer screen.
- 24Basic Operation for drawing with optional Universal Pen Holder in Wireless mode [Video]
- 25How to register Your Machine with CanvasWorkspace
- 26Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 27About DesignNCut Manager
- 28The mat is fed in at an angle and is not fed during cutting / drawing.
- 29What type of cut files and projects containing cut data other than built-in patterns are available?
- 30If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 31How do I transfer the pattern (to cut, draw, line emboss, etc.) using a USB cable? (Windows only)
- 32Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 33How can the thickness of drawing lines be adjusted when using the universal pen holder?
- 34Can rough material be cut?
- 35How to Activate a Premium Function on CanvasWorkspace for PC [Video]
- 36E94005 appears on the computer screen.
- 37E00010 appears on the computer screen.
- 38Adjusting the Blade Extension
- 39Downloading CanvasWorkspace application and Login [Video]
- 40N10004 appears on the computer screen.
- 41E91002 appears on the computer screen.
- 42E12002 appears on the computer screen.
- 43E10003 appears on the computer screen.
- 44E01005 appears on the computer screen.
- 45E00006 appears on the computer screen.
- 46The machine was turned off during the machine’s software update.
- 47How to create an account for CanvasWorkspace
- 48What should I do if lines not in the pattern are being drawn when using the universal pen holder?
- 49The material to be cut/drawn cannot be attached to the mat.
- 50How to attach the material to the mat