Innov-is 750E
 |
FAQs & Troubleshooting |
"Press the needle position button to raise the needle." appears on the LCD.
- You tried to select an embroidery pattern or change the layout when the needle was down.
- The machine was turned on while the needle was lowered.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to embroider.