FAX-2840
FAQs & Troubleshooting |
Set up a Group for Broadcasting faxes.
If you regularly want to send the same fax to multiple recipients, you can do it easily by setting up a Group. Groups allow you to send the same fax message to multiple numbers using a process called Broadcasting.
You can store 8 small Groups on your Brother machine or assign up to 221 numbers to one large Group. Every fax number you want to include in your Group must first be stored as its own One Touch or Speed Dial number, and each Group uses one One Touch or Speed Dial location.
For instructions to store One Touch or Speed Dial numbers, click here.
This solution includes two options for setting up Group:
OPTION 1: SETTING UP A GROUP FROM THE CONTROL PANEL
A. Print a Tel Index list:
The above image is a sample of a Tel Index list with four One Touch numbers already assigned.
B. Set up a Group
- To store a Group on a One Touch key, follow these steps:
- To store a Group on a Speed Dial location, follow these steps:
- To add a One Touch number, press the One Touch key on which the number is stored.
- To add a Speed Dial number, follow these steps:
The LCD will display the One Touch and Speed Dial numbers as you add them to the Group.
- One Touch locations begin with *.
- Speed Dial locations begin with #.
- To add more One Touch and Speed Dial numbers to the Group, repeat STEP 8.
- If you are finished adding numbers to the Group, press OK.
- Use the dial pad to enter a Group name.
The name can be up to 15 characters long.
- To store the name without a Group, go to STEP 11.
- To store another Group, go back to STEP 5.
- If you are finished storing Groups, press the Stop/Exit key.
CONFIRM THE GROUP BY PRINTING A TEL INDEX LIST
To confirm that the numbers are saved in the correct group, print the Tel Index list again. On this list, Group numbers will be marked on the GROUP DIAL page.
In the above image, one Group has been successfully created and named TRAINING. The numbers assigned to a Group are listed under that Group's name (TRAINING, in this example).
When you broadcast a fax, each number in the Group is dialed individually. After the document is scanned into memory, the machine dials the first number in the Group, transmits the fax, hangs up, and then dials the second number in the Group. This process is repeated until every number in the Group is dialed.
If a sending to one number is unsuccessful because the line is busy or the line condition prevents the fax from being sent, the Brother machine will disconnect and dial the next number in the Group. Once all numbers in the Group have been dialed, the Brother machine will attempt to dial the unsuccessful number(s) again.
After the Brother machine has dialed (and redialed, if the initial attempt to send was unsuccessful) all of the numbers in a Group, it will print a broadcast report that displays which numbers in the Group were transmitted successfully and which ones failed. This report prints automatically and cannot be disabled.
OPTION 2: SETTING UP A GROUP FROM A COMPUTER
- To store another Group, repeat STEP 3 through 8.
- To finish storing Groups, click Apply and wait as information is uploaded into the Brother machine.
If an error message stating "Error in Group setting. Please check group name, number, and type entries" appears, the Group number assigned is already being used, a check was placed in a Group field where a One Touch or Speed Dial number is not stored, a number has been entered in the Destination field of the Group, or a Group has been assigned to another Group. Left-click OK and double check the setup of the Group.