MFC-8950DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/10/2012
  • ID: faq00002647_001

When I send a fax from the machine, an error "not register." or "not registered." is displayed.

The Fax to server may be ON and this may cause the problem.
To solve the problem make sure that Fax to server is OFF.
There are two ways to change the settings of Fax to server: by using the control panel and by using the Web Based Management.

Please choose the appropriate way and follow the steps below.

 

Method 1: using the control panel

  1. Press Menu.
  2. Choose Network and Fax to Server.
  3. Choose Off and then press OK.
  4. Press Stop/Exit.

 

Method 2: using the Web Based Management

  1. Start your web browser.
  2. Type "http://machine's IP address/" into your browser (where "machine's IP address" is your machine's IP address).
    For example: http://192.168.1.2/
  3. Click Fax and Fax to Server.
  4. Choose Off.

    Fax to server

  5. Click Submit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-8110DN, DCP-8150DN, DCP-8155DN, MFC-8510DN, MFC-8710DW, MFC-8810DW, MFC-8910DW, MFC-8950DW, MFC-8950DWT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit