Adjusting the thread tension dials

Thread tension dial

image

image

From the left to right:

(1) Yellow marked tension disc is for left needle.

(2) Pink marked tension disc is for right needle.

(3) Green marked tension disc is for upperlooper.

(4) Blue marked tension disc is for lowerlooper.

(5) Tension selection mark.

(6) Dial up to decrease tension.

(7) Dial down to increase tension.

Make sure that the thread is properly seated in the tension discs by holding the tension release button to the right while passing the thread through the tension discs.

 

Tension control

Sewing is possible at position “4” for most circumstances.
If improper stitching occurs, adjust the tension according to the drawing below.
(Standard: SPAN 60/3Z)

image

(A) for heavy tension (set from 4 to 7)

 

(B) for light tension (set from 4 to 2)

 

(C) for medium tension (set from 5 to 3)

 

There is a thread tension adjustment dial for each needle thread, the lowerlooper thread and the upperlooper thread. The correct thread tension may vary according to the type and thickness of the fabric and the type of thread used. Thread tension adjustments may be necessary for any change in sewing materials. If the stitch quality is insufficient, select a different tension setting.

 

Adjusting the thread tension

(1) To select the correct tension, refer to the illustration of the thread tension dial above.
(2) If you cannot find the correct tension, refer to the chart of thread tension adjustment on the operation manual.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

1034D, 1134DW/ 1134D, 1634D, DZ1234, DZ1234

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.