How do I thread my machine for use with the twin needle option?

Depending on your machine, you have twin needle as an optional accessory.

Your sewing machine is designed for twin-needle sewing which allows you to sew using two upper threads.
You can use the same color or two different colors of thread for decorative stitches.
Twinneedle sewing works well with these stitches: the Straight Stitch and the Zigzag Stitch.(See note1).
Be sure that the two upper threads used for threading the twin needle have the same weight.
If the threads do not have the same weight, the stitching may not be consistent.
 

  1. INSERTING THE TWIN NEEDLE

    Insert the twin needle in the same way that a single needle is inserted.(See note2)

    The flat side of the needle should face toward the back and the rounded side should face toward you.

     

  2. SETTING THE EXTRA SPOOL PIN
    Place the extra vertical spool pin in the hole found on the top right-hand side of the machine.
    Place the second spool of thread on this pin as shown in following image.

       1 Extra spool pin
    extra vertical spool pin spool
  3. TWIN NEEDLE THREADING

    Each needle should be threaded separately.

    1. Threading the Right Needle
      Follow the same instructions for single needle threading.

       
    2. Threading the Left Needle
      Thread the left needle in the same way as the right needle was threaded, but do not pass the thread through the thread guide above the needle before passing it through the eye of the left needle as shown in following illustration.
    pass the thread 2 Right needle thread passes through this guide.

    3 Left needle thread passes in front of this guide.

    NOTE1:
    If your machine has the pattern selection dial, set the dial to the Straight Stitch(6-10) or the Zigzag Stitch(2).

    Pattern selection dial 1 Pattern selection dial
    NOTE2:
    • Use the zigzag presser foot.
    • If your machine has the stitch width knob, use a setting of less than 3 on the knob.
      stitch width knob 2 Stitch width knob
    • If your machine has the needle position selector, select M.
      needle position selector

     

     
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS2250PRW, LS2300PRW, LS2350, LS2400, LS-30, LX2375, LX3014, LX-3125/3125E, VX3240

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.