HL-L8250CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

Replace Belt

Follow the steps below to replace the belt unit.

 

For the order number (Order No.) of the belt unit, click here to see the Consumables & Options page.

  1. Make sure that the machine is turned on.
  2. Press the front cover release button and pull open the front cover.

      Open Front Cover
     
  3. Hold the blue handle of the drum unit. Pull the drum unit out until it stops.

      Pull Drum
     
  4. Turn the blue lock lever (1) at the left of the machine counterclockwise to the release position. Holding the blue handles of the drum unit, lift the front of the drum unit and remove it from the machine.

      Counter Clockwise
     
  5. Hold the blue handle of the belt unit with both hands and lift the belt unit up, and then pull it out.

      Lift Belt
     
  6. Unpack the new belt unit and install it in the machine. Make sure the belt unit is level and fits firmly into place.

      Unpack Belt
     
  7. Make sure the blue lock lever (1) is in the release position as shown in the illustration.

      Lock Lever Release Position
     
  8. Gently slide the drum unit into the machine until it stops at the blue lock lever.

      Slide Drum
     
  9. Turn the blue lock lever (1) clockwise to the lock position.

      Lock Lever Clockwise
     
  10. Push the drum unit in until it stops.

      Push Drum
     
  11. Close the front cover of the machine.
  12. Reset the belt unit counter.
    1. Press the Up or Down arrow key (+ or -) to choose Machine Info.. Press OK.
    2. Press the Up or Down arrow key (+ or -) to choose Reset Parts Life. Press OK.
    3. Press the Up or Down arrow key (+ or -) to choose Belt Unit.
    4. Read the message and press the Up arrow key (+) for Reset.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L8250CDN, HL-L8350CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.