Downloads
CUPSwrapper printer driver (rpm package) |
How to Install
-
Download the driver.
-
Login as a superuser.
-
Check if pre-required procedures are completed
For OpenSUSE10.3 or earlier:
Related distributions
openSUSE 10.3 or earlier
Related products/drivers
cupswrapper printer/PC-FAX drivers
Requirement
"lppasswd -g sys -a root" command is required before the installation.
(Setting the root password is required befor you can issue this command.)
For Fedora10:
Related distributions
Fedora10
Related products/drivers
P-touch/QL-Printer drivers
Requirement
SELinux configuration is required.
e.g. Set selinux "premissive mode" by the command "# setenforece 0" (superuser authorization is required)
For PT-9500PC:
Related distributions
Distributions that does not have "psutils" by default
Related products/drivers
PT-9500PC driver
Requirement
"psutils" is required to be installed.
-
Install LPR driver and cupswrapper driver.
-
Turn on your P-touch/QL-Printer and connect the USB or the network cable.
***Click the close button if the installation wizard comes up - Open the terminal and go to the directory where the drivers are.
-
Install LPR driver.
Command : rpm -ihv --nodeps (lpr-drivername) -
Install cupswrapper driver.
Command : rpm -ihv --nodeps (cupswrapper-drivername)
***On some distributions, you may see the following error message, please ignore it.
"lpadmin: Bad device-uri "brusb_(model name):/dev/usb"!"
-
Turn on your P-touch/QL-Printer and connect the USB or the network cable.
-
(for USB Connection) Configure your printer on the cups web interface
- Open a web browser and go to "http://localhost:631/printers".
-
Click "Modify Printer" and set following parameters.
- Your P-touch/QL-Printer's name for Device - Brother for Make/Manufacturer Selection - P-touch/QL-Printer's name for Model/Driver Selection
- Open a web browser and go to "http://localhost:631/printers".
-
Click "Modify Printer" and set following parameters.
- LPD/LPR Host or Printer or "AppSocket/HP JetDirect" for Device - socket://(Your printer's IP address) for Device URI - Brother for Make/Manufacturer Selection - Your printer's name for Model/Driver Selection
-
Set the media size and try a test print.
- Open a web browser and go to "http://localhost:631/printers."
- Select your machine name.
-
Click "Set Printer Options" and set the media size.
e.g. If you are using 62mm tape, select 62mm.
***P-touch/QL-Printer will return errors with smaller or bigger media width configuration. -
Click "Print Test Page"
***Media length for continuous tape is about 100mm.
***Use the paper tool command to add a custom media size longer/shorter than 100mm
Please also refer to FAQs for more information.
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the software on this page help you?
Step 2: If you have selected "Not helpful", choose from the following list that is close to your "Not helpful" reason. (multiple answers allowed)
Step 3: Are there any comments you would like to add?
Please note this form is used for feedback only.