----------------------------------------------------------------------------------------------

 Using the PJ-6xx Firmware Update Tool


----------------------------------------------------------------------------------------------

****************************************************************************

Note:
* The printer driver for PJ-6xx must be installed on the computer running
　this tool.
　If the printer driver is not installed, install it on the computer from
   the CD-ROM included with PJ-6xx before using this tool.
* Carefully read this information and perform the operation according to
   the instructions.
　In addition, quit all other applications before starting the operation.
* While the firmware is being updated, do not turn off the printer, try to access
　it through the network or try to print.

****************************************************************************

Setup
* Check that the printer driver for PJ-6xx is installed.
　If it is not installed, install it according to the instructions in the
   User's Guide.
* Using the enclosed USB cable, connect the PJ-6xx to the computer, and
   then turn them on.

 Update Procedure Using the PJ-6xx Firmware Update Tool

　     1. Click the [Download] button to begin downloading.
　     2. After downloading is finished, double-click the file to expand it.
　     3. Open the expanded folder, and then double-click "D_SETUP.EXE".
　　       Click the [Start] button.
　     4. Check that the printer name for Brother PJ-6xx appears in the list.
　　　      * If multiple PJ-6xx printer drivers are installed on the computer,
　　　　      PJ-6xx appears multiple times in the list. Select the PJ-6xx
　　　　      that is currently connected.
　     5. Click the [Update] button to display the confirmation message.
　　       When the firmware version of the printer and the firmware version to
　　       be transferred appear, check them.
　　       Click the [Yes] button to begin transferring the program.
　　        It may take a few minutes to transfer the program.
　　　       * Do not operate PJ-6xx or disconnect the USB cable until the
　　　　       update operation is completed.
　     6. When the message "Completed the firmware update for PJ-6xx."
　　       appears, the transfer of the program is finished. Exit the update tool
            on the computer.


　* If an error occurred during the update operation or if the operation was
　　not completed successfully, try performing the operation again from the
     beginning.
　　If the update operation cannot be completed successfully after multiple
　　attempts, check the printer driver settings and the cable connections.
　　　

　* The customer assumes full responsibility for performing the update operation.