How to Install

  1. Download the target file to your Macintosh. Once downloaded, the Installer Disk Image will be mounted on your Desktop. You will find the installer package icon "xxxxxxxx.pkg" on the desktop.

    Note:
    If you don't find the installer package icon, please extract the downloaded file "xxxxxxxx.dmg" manually with the Macintosh "Disk Utility". The "Disk Utility " can be found in /Applications/Utilities. Using the "Disk Utility", the Installer Disk Image can be mounted.
     
  2. Double click the installer package icon "xxxxxxxx.pkg". Follow the instructions on the screen.

For USB Users:

  1. Connect the USB cable into your machine and your Macintosh. Ensure that the machine is powered on.
    Note:
    Do not connect the machine to a USB port on a keyboard or a non-powered USB hub.
  2. The printer driver will be installed automatically.
  3. You need to make sure if the installation of the printer driver is complete.
  4. Select "System Preferences" from the Apple Menu.
  5. Click the "Printers & Scanners" icon.
  6. Check if your Brother machine is displayed in the "Printers" section.
  7. If your Brother machine is displayed, the setup is now complete.
    If your Brother machine is not displayed, try to disconnect and connect the USB interface cable to your Macintosh again. And then repeat the steps 4 - 6 to check if the installation of the printer driver is complete.

For Network Users (if applicable):

  1. Connect your Brother machine and your Macintosh to the network.
    If you have not connected the machine to your network, click here to see how to configure the Brother machine for a network.
  2. Select "System Preferences" from the Apple Menu.
  3. Click the "Printers & Scanners" icon.
  4. Click the "+" button which is located below the "Printers" section.
  5. Click the "Default" icon which is located at the top of the dialog box.
  6. Select your machine from the "Name" list.
  7. Make sure that "XXXXXXX + CUPS" is selected in the "Use" list. (Where XXXXXXX is your model name.)
  8. Click "Add". The printer is now available in the "Printers & Scanners" list.
  9. Select "Quit System Preferences" from the Apple Menu. The setup is now complete.

 

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the software on this page help you?

Step 2: If you have selected "Not helpful", choose from the following list that is close to your "Not helpful" reason. (multiple answers allowed)

  •     

Step 3: €Are there any comments you would like to add?

Please note this form is used for feedback only.