Downloads

Update software

Update software

If your download does not start automatically, please click here.

How to Install

 

The downloaded file is a compressed (zipped) file. [ccbuhen111.zip]
Decompress (unzip) the downloaded file.
And then you will see a new folder "ccbuhen111" and the following files in the folder.

File Language Version Size Description
ccbuhen100.up5 Multilingual 1.11 3.00MB Software - 1/2
ccbuhen101.up5 Multilingual 1.11 3.00MB Software - 2/2

 

 

How to confirm the software version of the machine.

  1. Turn on the machine. The LCD comes on.
     
  2. Press  key  (Settings key) on the operation panel.

      fig.

     

  3. The settings screen appears.
     
  4. Press  key  (Previous page key).
     
  5. If the version is already v1.11 or later, it is not necessary to update your machine with the program on this page.

      fig.

 

How to update your machine's software

You can use USB Flash drive (USB Flash memory) and a computer to download software updates for your machine.

  • When using USB Flash drive (USB Flash memory) to update the software, check that no data other than the update file is saved on the USB Flash drive (USB Flash memory) being used before starting to update.
  1. Insert the USB Flash drive (USB Flash memory) into the USB port on the computer.

      fig.
         1  USB port on the computer      2  USB Flash drive (USB Flash memory)

     

  2. The "Removable Disk" icon appears in "Computer (My computer)" on the computer.

      fig.

     

  3. Copy the update files (both ccbuhen100.up5 and ccbuhen101.up5) to "Removable Disk".

      fig.

    ----- Note -----
     The USB Flash drive (USB Flash memory) should only contain the update files.

     

  4. Safely remove the USB Flash drive (USB Flash memory) from the USB port on the computer.

      fig.
         1  USB port on the computer      2  USB Flash drive (USB Flash memory)

     

  5. Press and hold the  key  (Help key) while turning on the machine.
    The following screen appears.

      fig.

     

  6. Insert the USB Flash drive (USB Flash memory) into the USB port on the machine.

      fig.
         1  USB port for media      2  USB Flash drive (USB Flash memory)

     When using USB Flash drive (USB Flash memory) equipped with an access indicator, the access indicator will begin flashing after the media is inserted into your computer or machine, and may take about 5 to 6 seconds before the USB Flash drive (USB Flash memory) is recognized.
     The length of time differs depending on the USB Flash drive (USB Flash memory).

  7. Press  key  (LOAD key).
    The following screen appears.

      fig.

    If an error occurred, a text error message will appear.
    At this time, turn the machine off, and then start the procedure again from step 1.

  8. When the following screen appears, updating is completed.

      fig.

     

  9. Remove the USB Flash drive (USB Flash memory), and turn the machine off and on again.
     
  10. Your machine's software has been updated.

 

UPDATE HISTORY DETAIL

Version 1.11 (November 2013)

  • Improved the quality of reinforcement stitches when embroidering.

 

Version 1.10 (April 2011)

  • Some display languages have been added. (Selectable languages differ according to country and region.)
  • Some characters have been added to the embroidery fonts.
      * For details, refer to the following descriptions.
         Additional features of software (PDF 262KB)

 

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the software on this page help you?

Step 2: If you have selected "Not helpful", choose from the following list that is close to your "Not helpful" reason. (multiple answers allowed)

  •     

Step 3: €Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit