Downloads

Firmware Update Tool

Firmware Update Tool

Important Notes before Updating

     
    • Please make sure that the machine you are going to update the firmware is not busy. Also, make sure that there is no data left in the machine memory when running the firmware update tool.
     
    • Please check the following on your computer.
      • Open Printer Properties and confirm that your printer is functioning correctly by printing a test page.
      • Please close all applications and TSR's.
      • If you are using a Windows XP SP2 Firewall or other Firewall software, disable it.
     
    • It is not possible to update the firmware unless the following conditions are met on your machine.
      • The machine is not calling or dialing FAX.
      • The machine is not scanning a document.
      • The machine is not copying / or in copy settings (copy mode, number of copies, etc..).
      • The machine is not in the Settings Menu.
      • The telephone line is not busy. Disconnect your telephone line (to prevent any incoming calls).
      • There's no error message on LCD panel.
      • If you are using a Macintosh computer, Printer Driver or CUPS Printer Driver must be installed.
     
    • It is not possible to update the firmware unless the following conditions are met on your machine.
      • The machine is not scanning a document.
      • The machine is not copying / or in copy settings (copy mode, number of copies, etc..).
      • The machine is not in the Settings Menu.
      • There's no error message on LCD panel.
      • If you are using a Macintosh computer, Printer Driver or CUPS Printer Driver must be installed.

How to Install

Note:

Please do not turn off the machine until firmware update finishes.

 

[When the machine is connected to the Macintosh via USB]

  1. Once downloading is completed, open the Downloads folder in the Dock and double click the downloaded file named “BRxxxxxx.dmg”. The Installer Disk Image will be mounted on your Desktop.

  2. Double click the Installer Disk Image, and then double click the installer package icon named " FirmwareUpdateTool.pkg".
  3. Follow the instructions on the screen. Make sure that the machine is connected to the Macintosh with a USB cable.
  4. The update will start.
  5. When the "Successfully Completed" message is displayed, click 'Done'.

[When the machine is connected to the network]

  1. Once downloading is completed, open the Downloads folder in the Dock and double click the downloaded file named “BRxxxxxx.dmg”. The Installer Disk Image will be mounted on your Desktop.
  2. Double click the Installer Disk Image, and then double click the installer package icon named " FirmwareUpdateTool.pkg".
  3. Follow the instructions on the screen.
    Note:
    * If the "Failed to connect to the Brother Internet Server. Make sure your PC is connected to Internet." message appears, please check the following:
    1. The network cable is connected to your Macintosh.
    2. Your Macintosh is connected to network.
    3. Your anti-virus software and firewall software are temporarliy disabled.
    * If the "Cannot find a machine to update." message appears, please check the following:

     

    1. The machine is turned on.
    2. The network cable is connected to the machine.
    3. The IP address of the machine is correctly set.
    4. Your anti-virus software and firewall software are temporarliy disabled.
  4. The update will start.
  5. When the "Successfully Completed" message is displayed, click 'Done'.
    If you have other machines connected to the network, you can update the firmware on these machines by clicking 'Continue' and selecting the model you would like to update the firmware.

This product includes SNMP software from WestHawk Ltd.

Copyright (C) 1995, 1996 by West Consulting BV

Permission to use, copy, modify, and distribute this software for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both the copyright notice and this permission notice appear in supporting documentation.
This software is provided "as is" without express or implied warranty.


Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 by Westhawk Ltd

Permission to use, copy, modify, and distribute this software for any purpose and without fee is hereby granted, provided that the above copyright notices appear in all copies and that both the copyright notice and this permission notice appear in supporting documentation.
This software is provided "as is" without express or implied warranty.

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the software on this page help you?

Step 2: If you have selected "Not helpful", choose from the following list that is close to your "Not helpful" reason. (multiple answers allowed)

  •     

Step 3: €Are there any comments you would like to add?

Please note this form is used for feedback only.