Downloads

Firmware Update Tool

Firmware Update Tool

Follow the Steps below to Download

Step 1Check detail information.

TitleDescriptionLanguageRelease Date
(Firmware Version)		Size
Firmware Update Tool
This tool updates your Brother machine firmware via the internet, by sending the firmware to your machine from the Brother internet server.
English03/09/2009
(G or L)		18.83
MB
Update History
03/09/2009 Main: G or L
  • Changes the maximum value setting so that the ink absorber box can hold more waste Ink.
  • Improvement to reduce damage to the machine when a paper jam occurs.
  • Correction of errors when forwarding FAX received data.

    • 25/06/2008  
  • Corrects network issues that occur under certain conditions.
  • Improvement for the control of the print head motor.
  • Correction of printing issue when using Photocapture.

    • 24/04/2008  
  • Improves the print quality when printing on glossy paper.
  • Improves the machine stability.
  • Improvement for the control of the print head motor.
  • Correction of printing issue when using Photocapture.

    • 29/03/2007  
  • Corrects the issue of not turning off the machine by pressing the on/off key.

    • 01/02/2007  
  • Firmware Version up.

    • 30/11/2006  
  • Corrects the issue that the ink level is displayed incorrectly when displaying "No Cartridge" on LCD.
  • Corrects the issue that the ink level in the other cartridge is displayed incorrectly after replacing the empty cartridge.

    • 21/09/2006  
  • Corrects the isssue that the machine prints blank pages after cleaning a Paper jam.
    		•  Supported OS

    Windows 10 (32-bit), Windows 10 (64-bit), Windows 8.1 (32-bit), Windows 8.1 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 7 (32-bit), Windows 7 (64-bit)
    How to identify the firmware version

    Click here to see how to identify the firmware version.

    Step 2Read before downloading.

    Notes before downloading
     
    • Please make sure that the machine you are going to update the firmware is not busy. Also, make sure that there is no data left in the machine memory when running the firmware update tool.
     
    • Please check the following on your computer.
      • Open Printer Properties and confirm that your printer is functioning correctly by printing a test page.
      • Please close all applications and TSR's.
      • If you are using a Windows XP SP2 Firewall or other Firewall software, disable it.
     
    • It is not possible to update the firmware unless the following conditions are met on your machine.
      • FAX receive data does not exists in the memory of the machine. For instructions on how to check your memory is clear, please refer to the 'User's Guide'.
      • FAX send data does not exists in the memory of the machine (timer sending job or retry job).
      • There is no ICM (Incoming Message) voice data. For instructions on how to clear ICM, please refer to the 'User's Guide'.
      • The machine is not calling or dialing FAX.
      • The machine is not scanning a document.
      • The machine is not copying / or in copy settings (copy mode, number of copies, etc..).
      • There are no Media cards inserted into the machine.
      • The machine is not in the Settings Menu.
      • The telephone line is not busy. Disconnect your telephone line (to prevent any incoming calls).
      • There's no error message on LCD panel.
      • If you are using a Macintosh computer, Printer Driver or CUPS Printer Driver must be installed.
     

    The following data will be deleted when you update the firmware.

    • Outgoing message
    • Journal report data
    • Caller ID log 

    Step 3Read the End-User License Agreement (EULA).

    Agree to the EULA and Download